CHARACTERISTICS OF SUBSTRATE

Aluminium for construction purposes is usually alloyed with other agents to form a hard surface. Aluminium is usually available in sheet or cross-sectional forms for most purposes. Some cast aluminium work is available usually as decorative corner features. Most aluminium is quite resistant to corrosion but the oxide film that quickly forms on freshly exposed surfaces reduces the adhesion of most coatings and needs to be substantially removed prior to coating.

SURFACE PREPARATION

Aluminium should be abraded with wet and dry paper or a nylon scouring pad and mineral turpentine to assist with coating adhesion. The prepared surface should be wiped clean with Wax & Grease Remover to remove any solvent/ sanding residues. Painting should be carried out as soon as practical after the preparation work has been performed.

ADDITIONAL INFORMATION

Drying times are approximate at 25° C and 50% relative humidity. Allow longer drying times under cool, moist or low air movement conditions. Spreading rates will vary from the quoted theoretical rates depending on application methods and surrounding conditions.
Do not paint if temperatures are below 10°C or likely to fall below 10°C during drying period
Refer to TECHNICAL DATA SHEETS for additional information.

DATE OF ISSUE: 14-Mar-2012

Disclaimer: The Luxury Paints Online Specification System offers generic coating specifications which are based on general painting conditions. Certain factors including spreading rates, substrate condition etc could affect the performance or appearance of a coating system and may vary between individual projects. In the case of a situation or condition not mentioned in this current system please email info@luxurypaints.com.au to request a custom specification.

The information provided in the Luxury Paints Online Specification System is intended as guide only and is correct at the time of printing. It is valid for a period of twelve (12) months from the date of issue. Each specification should be read in conjunction with all relevant Technical Data sheets and Safety Data sheets and it is the responsibility of the reader to check this information prior to recommending the specification system to ensure that it is suited for the intended purpose.

Luxury Paints recommends that the online system should be used as a master reference for all new specifications. Printed copies of specification sheets should be cross referenced with the online system prior to issuing to ensure validity. Luxury Paints does not take responsibility for printed hardcopy specifications that have expired.